InstaBeam Cinema projector on an oak sideboard, a few feet from the wall

How Far From the Wall Should a Projector Be? Picture Size, Distance and Screens

Before you buy a projector, it helps to know two things: how big a picture you want, and how much room you have between the projector and the wall. This guide gives you the distances for every InstaBeam projector, and answers the other question everyone asks: do you need a screen?

Throw ratio, in plain English

Every projector has a throw ratio: the distance from the wall divided by the width of the picture. With a throw ratio of 1.0, a projector 7 feet from the wall makes a picture about 7 feet wide. With 1.2, you need a little more distance for the same width.

How far from the wall, by picture size

Distances are measured from the lens to the wall, for a standard widescreen (16:9) picture, rounded to the nearest few inches.

Picture size (diagonal) Picture width Cinema (1.2) Cinema Plus & Max (1.0)
80″ about 5′ 10″ about 7′ about 5′ 10″
100″ about 7′ 3″ about 8′ 9″ about 7′ 3″
120″ about 8′ 9″ about 10′ 6″ about 8′ 9″
135″ about 9′ 10″ — about 9′ 10″
150″ about 10′ 11″ — about 10′ 11″ (Max only)

Short on space? A 100-inch picture from the Cinema Plus or Max needs only about 7 feet, which fits most living rooms and bedrooms.

Where to put the projector

  • On a shelf, console or coffee table behind or beside the sofa, pointed at the wall. No mounting needed.
  • Off to an angle? All three have auto keystone and auto focus, so the picture squares itself up and sharpens in seconds if the projector isn't perfectly straight on.
  • On the ceiling, from bed: the Cinema Plus and Cinema Max sit in a tilt cradle that points straight up; the Cinema's stand rotates 360°.

Do you need a screen?

No. Most of our customers start with a plain wall. For the best picture:

  • A smooth, white or light-gray wall works well.
  • Avoid strong colors, heavy texture and glossy paint, which can tint the picture or create a shiny hot spot.
  • A screen, or even a smooth white sheet pulled tight, makes the picture a little brighter and crisper. Home theater retailers like Crutchfield recommend a matched screen if you're building a dedicated movie room, but it's an upgrade, not a requirement.

How to measure your room in one minute

  1. Measure from the wall you'll project on to the spot where the projector will sit.
  2. For the Cinema Plus or Max, that distance is roughly your picture width. For the Cinema, divide it by 1.2.
  3. Picture width × 1.15 ≈ the diagonal size in inches. For example, 7′ 3″ wide (87 inches) gives about a 100-inch picture.

Every InstaBeam product page also has a room-fit guide. Compare the projectors, and try yours at home for 30 nights.

Related reading

Sources

Back to blog